Hello Steven, When looking for a CNC service here I asked these questions; [1] - Do you do one-off jobs? [2] - Do you have a 8-foot by 4-foot bed? [3] - Is your machine compatible with DXF file...

@Colin Angus  Hello , I would be interested in knowing how to evaluate the potential of finding a CNC shop that can handle this kind of work. What are the specs, requirements I'd be asking the...

Hello all I'm posting to see if I can find a potential RowCruiser building partner here in Manitoba.  If anyone from Winnipeg is contemplating such a build we should grab a coffee and chat, ...

We are (slowly) preparing for a retirement sailing around the world.  I looked at an Oxford Wherry over 2 years ago but wasn't able to go further, now with Fyne Boat Kits able to provide a CNC...

Hello Asier,That sounds like a beautiful region you will be exploring in Turkey.  It's hard to say how far you will be able to go each day - it all depends on your fitness level, level of expe...

Hello Austin - The ideal spot to place the seat for fixed seat rowing is over the middle bulkhead.  You are correct that having it a little aft of center is good, but what we've found is that ...

My boat is coming along. I'm ready to install the seat & oarlocks. I'm setting up for fixed seat rowing (my bad hip doesn't like sliding seats). Just eyeballing things, it looks like the seat p...

Hi there, I'm planning to do an expedition on the aegean coast of Turkey that will last approximately 12 days. It will be my first expedition on a rowboat while I do have good experience on a sailb...

I found that by assembling the amas and alas off the boat on flat surface, as they were when the footplates were fitted, and then lifting it onto the boat in a single piece, the fit was much improv...

@Colin Angus  I'm delighted to share my experience with Want.net CNC Machine Service for a local CNC cutting job. Their pricing was fair and the quality of their work was outstanding. Their c...

This is a great deal for a new Oxford Wherry! I have seen this same model for sale for much more money. At $3,900, this is an incredible find and a great opportunity to get a top-of-the-line wherry...

I'm loving all of the beautiful photos posted of the Row Cruiser! I'm especially in awe of the amazing sunset photos. This boat looks like it's perfect for a calm and relaxing evening. I can't wait...

Sounds like an amazing adventure! If you're up for rowing 300 miles up the Vancouver coast, I'd definitely recommend the Rowcruisers.

Wow!  Beautiful cinemetography!  Your video not only captures the challenges of extended winter rowing, but the rugged beauty off Vancouver Island.

Hello Joseph - Worry not, it shouldn't be too difficult to resolve this issue.  It is a very precise alignment, and is easy for things to shift slightly - especially with such long spars. ...

Today I tried to do the final fitting of the amas/akas and the critical step of drilling and bolting of the akas to the mounts while the amas were in position. I had dry fit the amas to the akas pr...

Such a great video you guys created!  Thanks for posting - I'm sure many builders will find this useful.

Step-by-step video following one of the rowcruisers built for our Northwest Passage expedition this summer.