I am working on a cost estimate to build the Sailing Rowcruiser before buying the plans. I can't seem to find a materials list published on the website. For starters, how many sheets of plywood are required for the build, including amas for the sail rig?
Please find the materials list for the RowCruiser below. For the amas, one additional piece of 4mm sheet of plywood is required too.
Building Materials
6 sheets of Okoume 4 mm plywood (manufactured to BS 1088 standards)
2 sheets Okoume 6 mm plywood (BS 1088)
6 gallons epoxy resin and hardener (combined volume)
Disposable measuring/mix containers or dispensing epoxy pumps and mixing containers (old yogurt containers work well)
4 oz bronze ring nails
2 knot-free spruce construction 2x4’s 10 feet long
4 knot-free spruce 2x4’s 8 feet long
1 knot-free spruce 2x4’ 10 feet long
6
220’ of 18 gauge copper wire
Two pounds wood flour
20 yards of 50”-wide glass cloth (6 oz density)
60 feet of 3” fiberglass tape
3 syringes
Disposable gloves
5” round hatches (inspection ports) and attachment hardware
15 5” foam rollers
2 roller trays
2 roller handles
10 disposable 2” brushes
10 2” spatulas
40 tongue depressors
40 coffee stir sticks
4 10” spatulas (plastic drywall applicator)
10 heavy duty Ziploc bags
25’ neoprene weather stripping
45’ ¾” nylon webbing
9 quick release buckles
6 2” #8 stainless steel flat head screws
18 ¾ inch #6 flat head stainless screws
18 # 6 stainless washers
Thank you Angus for your prompt reply. I will be ordering plans soon!
Thank you Angus for your prompt reply. I will be ordering plans soon!
I just got the plans and they list 2sheets of 4 mm and 6 sheets of 6 mm both in the manual and on the pdf plans. I am assuming gust a missprint on the post.
