Guess it depends on the thickness off the mast you're using, they should be called a "deck collar" or similar. I'm using optimist masts and any large nautical shop should have these collars, but t...
@Colin Wood Hi Colin, sorry it took a bit to reply but it's been a bit hectic around me. I really just wanted to point out the difference, there's no norm or anything, and both 3 or 5 layer...
@Colin Wood It's not that using a 3 layer 6mm is wrong, I justed wanted to point out the difference :)
@Colin Wood Hi Colin, Might be wise the check with the company on the amount of layers building up the 6mm. From experience I know there's a 3 layer version and a 5 layer. 3 layers would ha...
@Thomas Troy 6mm is a lot harder to bend than 4mm so it might be hard to get it in the right curve.
@Thomas Krische Hi Thomas! I guessed a bit too, still unsure how it's going to work out, but I'm using 2 similar sized sails. Both for an Optimist. With the Akas being a potential hindranc...
Hi Thomas! Great progress! When I did my inside it was a bit bubbly too, I found it really hard to judge the amount of epoxy and the pressure of the spatulas without pulling on the glass. T...
@Bill Hutton Wow that looks great! Really like the light blue/gray combo, pretty sure that a latex would work for the top part:) With the hatches I have no experience, sorry. About t...
@Bill Hutton Hi Bill, what a great step to glue the decks:D did it come out as you hoped? Any pictures??? I really needed the extra space for my legs so it was an easy decision. Ha...
@Bill Hutton Hi Bill, Not sure if it helps but I can tell you my choice on that matter. I thought the space would be poorly accessible from the inside so I choose to go with the "normal" ha...
@Colin Angus Great, thank you for the quick reply! Michiel
Hello Colin, Hopefully I can start building a Rowcruiser in a few weeks or so. When discussing the plans with a friend with a CNC he noticed that the plans were scaled, which is not a proble...
