Australia: I live near Sydney and Bruynzeel is a great source for quality marine ply.  Okoume BS1088 4 mm, as of Oct, 2022, is $130 (Ozzie Dollars) a sheet. Bruynzeel Plywoods - Timber & ...

In the San Francisco bay area, for my last build, I purchased Joubert BS1088 okoume as well as some meranti from: Moore Newton Hardwoods 2115 Williams Street, San Leandro, California 94577, Unite...

California Forest Plywood, with two locations in California sells Jouberts Okoume plywood.  14711 Artesia Blvd.La Mirada, CA 90638 P: (714) 523-1721 and  3131 Hoov...

Hey Tom - As you know, for simplicity, our sliding seat system has a fixed foot assembly.  The idea is that it is initially set up for the primary rower, and that for other rowers of different...

That's great, thanks Colin.  Will look into it.

Hi Eric - We've used the Trailex SUT350-S with good results. The sizing is perfect for the RowCruiser - it's designed for long skinny boats.  There are a few elements of the design that aren't...

Looking for recommendations on a highway worthy trailer for my rowcruiser.  I seem to remember seeing one posted at some point a few years ago but can't find it now.  Any help is apprecia...

It can be done with satisfactory results, but overall, it's usually not worth it.  Okoume has several distinct advantages - it is lightweight, strong, and has a beatiful dark colour when finis...

It is possible if you modify the forward bulkhead to create a large opening. Not really recommendable, though, as it's tight, and I don't think you can even close the hatch unless you lie flat on y...

I thought I saw on the website that someone has slept in the forward compartment of their Expedition Rowboat on a cruise camping trip.   Is this really possible (for a 5'7" individual in this ...

Has anybody used baltic birch or poplar plywood for building their boats instead of okoume?  

I'll check around here for gasket materials. I never considered using the roof! I've tied canoe and kayak up there, I just figured the expedition would be too heavy.  But it's worth a try.&nbs...

For you Mid-Atlantic Builders and where I purchased my plywood to build my Cambridge Rowing Shell. CLC  - Chesapeake Light Craft 410.267.0137 Mon-Fri: 9-5 EST1805 George AvenueAnnapolis, MD...

I love it!  Interesting to see use of the Scout and Portage pram sails.  They go nicely with the boat.  I see the forward sail has reefing capabilities, which is useful.  I'm in...

Last year I built a sliding seat & rigger unit for my rowing canoe.  This year I've come across a modification question.  Does anyone have any experience in adapting the sliding seat ...

Pretty strong, but not overpowering, weather helm when pressed hard, no fault of the design I'm sure, likely from venturing away from the rec'd sails. I also moved the forward bulkhead forward a bi...

Finished my boat and been enjoying learning how to handle it, no big adventures yet, hope to remedy that soon. I completed the main hull and was able to row it late September last year, finished th...

Yes, there is a daggerboard.

@Colin Angus That bad huh !  That picture was my first sail, after about 5mins in the water, so I'm not surprised it's not set right. I intend to get out this weekend.  I'll be mindful o...

Thanks for all the posts.  And Theo, thanks for posting the Noah's rates.  I was going to look into that.  The beauty of Noah's is you can get it shipped to your door, which means ev...