Expedition Kit Contents

The Expedition Kit includes the plywood parts, sheer clamps, fiberglass, epoxy resin, and all other components necessary for building the boat. It also comes with a detailed manual and plans study page.

List of Included Items

CNC Cut Okoume (Lloyds Approved BS1088) Marine Plywood Components (See Diagram of Cut Components) - see wood component list below
Study Plans Page (See Study Plans)
Detailed Manual
Sheer Clamps
2 gallons Epoxy Resin
1 gallon Epoxy Hardener
14 yards Fibreglass Cloth 6oz (50" wide)
20 yards Fibreglass Tape 6 oz 3" wide
3 lbs Wood Flour
1 quart Microballoons (Profill)
2 Syringes
30 Epoxy Measuring containers 12 oz
10 Epoxy Measuring containers 24 oz
17 pairs Disposable Gloves
120 ft 18 Gauge Copper Wire
10 ft Waxed Paper
5 Disposable 2" brushes
10 Foam rollers
1 Roller tray
1 Roller handle
5 spatulas (2")
1 Small artists' brush
25 Tongue depressors
10 Miniature tongue depressors
5 Heavy Duty Ziploc bags
17' Neoprene sealing strips
2oz Bronze ring nails
40' Nylon 3/4" Webbing
10 Quick release buckles
2 screws (2")
2 round hatches (5") plus hardware
20 stainless screws (3/4")
20 finishing washers (3/4")
2 epoxy spreaders (10")

List of Wood Components

All wood components are precision cut by CNC from top quality Okoume (Lloyds Approved BS1088) Marine Plywood. See Diagram of Cut Components.

Hull Panels 15
Bulkheads 3
Deck panels 6
Cockpit side panels 2
Hatches 3
Hatch lips 12
Hatch opening reinforcing 12
Hatch supports 7
Butt plates 2
Coaming pieces 2
Deck arch beam 3
Bevel Guide 1
Sheer clamps 6

Follow

   ✉