R2AK - The Finish Line


by Julie Angus 8 Comments


13 days 1 hour and 59 minutes.  That's how long it took Colin to row and sail from Victoria to Ketchikan in the RowCruiser.  Today at 12:59 AKDT he rowed up to the finish line in Ketchikan.  It was a fantastic moment that Race to Alaska streamed live on their FB page.  He was greeted by a number of the racers from boats that had already arrived, as well as customs folks and a case of beer. Colin was exhausted and elated and rang the bell with well-deserved gusto.

The last 32 hours have been challenging.  Yesterday he rowed for 15.5 hours straight, the longest he's ever rowed for continuously.  Then the anchorage he was about to pull into turned out to be inappropriate so he had to continue through the night.  Once morning arrived, the sea returned to dead calm following by headwinds, and he was so exhausted that he was falling asleep between oar strokes.  Then, as if mother nature was watching, she devised a way to wake Colin up.  A killer whale charged his boat.  It raced towards Colin and leapt out of the water.  It was huge he said, like a submarine.  A couple inches before reaching his boat, it gracefully plunged back into the ocean. Wow.

Colin is staying in Ketchikan until Wednesday when he’ll catch the ferry to Bellingham and roll his boat onto the ferry with him.  That’s the beauty of having such a small boat; it gets treated like a kayak and the boat can travel with him for a nominal fee.  So far Ketchikan is treating him amazingly. It’s beautiful, the people are exceedingly friendly and he can almost walk without stumbling.  After being on his boat for over 13 days, he’s got sea legs and even though the only beer he had was upon arrival, he’s stumbling around like he’s had a few too many.  Nothing a good night sleep and some rest can’t cure.




Julie Angus
Julie Angus

Author



8 Responses

Bruce Angus
Bruce Angus

October 28, 2016

Good on you mate….you’re a credit to the clan….

Jimi Wright
Jimi Wright

October 28, 2016

Good on ya Collin. You make small boaters and single handers proud. And with best in class design.

Mark German
Mark German

October 28, 2016

Amazing accomplishment Colin! How you managed to go so far so fast is incredible and must certainly be the envy of the remaining fleet. It certainly proves the rowcruiser design and adds to your (already long) list of creds! And it certainly sets a highwater mark (pun intended) for the small boats competing in the R2AK.

MICHAEL DEMARCO
MICHAEL DEMARCO

October 28, 2016

Great journey – you’ve inspired me to start reading your books.

Wool Gatherer
Wool Gatherer

October 28, 2016

Congratulations Colin. Must be very satisfying to know you are not only the first single-hander, but also the first who has finished in a boat he designed, built, AND sailed/rowed himself. A remarkable autonomous effort.

Joseph P Dillard
Joseph P Dillard

October 28, 2016

Totally awesome!

Jean
Jean

October 28, 2016

Bravo Colin !

ronp
ronp

October 28, 2016

Way to go! What an incredible accomplishment!

Leave a comment

Comments will be approved before showing up.


Also in News

Human Powered Achievements through the Northwest Passage
Human Powered Achievements through the Northwest Passage

by Julie Angus

At Angus Rowboats, our passion for adventure naturally draws us to the mystique of the Northwest Passage – one of the world's most captivating and perilous waterways. Historically, this elusive passage promised a shorter shipping route, spurring early navigators to fervently chart and struggle through its icy intricacies.

The summer of 2023 saw three audacious teams, including one using our very own RowCruiser boats, aiming to be the first to traverse NW Passage solely by human power within a single season. As the season concludes, we've chronicled these attempts, and catalogued past human-powered endeavors to navigate the Northwest Passage.

Read More

Creating a Bookcase from a Boat
Creating a Bookcase from a Boat

by Colin Angus

A good boat is a versatile boat.  Our wheelbarrow boat is good in and out of the water.  It can be used to haul bags of concrete around the construction site, is a vehicle to go crabbing with the kids, or it can be transformed into an elegant bookcase.

Read More

CNC - Cut Kits for Angus Rowboat's Customers Outside of North America
CNC - Cut Kits for Angus Rowboat's Customers Outside of North America

by Julie Angus

Our boat kits are shipped from the PNW, and delivered to customers in the US and Canada.  Due to prohibitive shipping costs, we do not ship our boat kits outside of North America.  Building from plans is one alternative, however, some would prefer to build from a kit.

Read More