Day 1 R2AK report


by Julie Angus

4-IMG_6804The R2AK race to Ketchikan Alaska started yesterday from Victoria’s Inner Harbour.  At noon the bell rang and more than a hundred salty sailors, rowers and one paddle boarder ran down to their vessels and started the 720 mile journey.

Colin hopped in his RowCruiser and started rowing.  Since there’s no motors allowed on this race and sails are forbidden in the inner harbour, 40 foot sailboats and catamaran’s were also being rowed, which is quite a comical sight.

Once Colin rounded the breakwater, he hoisted his sails and started sailing and rowing.  Winds were pretty light yesterday and he rowed for most of the day. For much of the day he averaged 4 knots and he’s at the front of the pack for boats under 20 feet.

He dropped anchor at 10 pm last night on the southern side of Salt Spring Island and started early this morning. He’s now coming up the west side of Salt Spring and closing in on Crofton.

It’s a tight race with the stand up paddle boarder and the French Liteboat close behind Colin.  The other small or solo boats are going a different route and are on the east side of Salt Spring or are heading towards the more open waters between the Gulf Islands and Vancouver.  The wind is stronger there so it will be better sailing, however it’s coming from the north so it’ll be on their nose.

The big boats are leading. Mad Dog Racing, the 32’ catamaran that won the first leg from Port Townsend to Victoria, is at the front with a lead of about 80 miles on the next boat.  These are powerful racing sailboats with 3 or more crew that are going non-stop, and very different from the small or solo boat.  It is very much 2 races within one and it’ll be fun to watch both. Stay glued to the race tracker at http://tracker.r2ak.com.




Julie Angus
Julie Angus

Author



Leave a comment

Comments will be approved before showing up.


Also in News

Human Powered Achievements through the Northwest Passage
Human Powered Achievements through the Northwest Passage

by Julie Angus

At Angus Rowboats, our passion for adventure naturally draws us to the mystique of the Northwest Passage – one of the world's most captivating and perilous waterways. Historically, this elusive passage promised a shorter shipping route, spurring early navigators to fervently chart and struggle through its icy intricacies.

The summer of 2023 saw three audacious teams, including one using our very own RowCruiser boats, aiming to be the first to traverse NW Passage solely by human power within a single season. As the season concludes, we've chronicled these attempts, and catalogued past human-powered endeavors to navigate the Northwest Passage.

Read More

Creating a Bookcase from a Boat
Creating a Bookcase from a Boat

by Colin Angus

A good boat is a versatile boat.  Our wheelbarrow boat is good in and out of the water.  It can be used to haul bags of concrete around the construction site, is a vehicle to go crabbing with the kids, or it can be transformed into an elegant bookcase.

Read More

CNC - Cut Kits for Angus Rowboat's Customers Outside of North America
CNC - Cut Kits for Angus Rowboat's Customers Outside of North America

by Julie Angus

Our boat kits are shipped from the PNW, and delivered to customers in the US and Canada.  Due to prohibitive shipping costs, we do not ship our boat kits outside of North America.  Building from plans is one alternative, however, some would prefer to build from a kit.

Read More